Cmmg Ar-15 Barrel Assemblies 22lr. Perfect for building your custom dedicated 22LR AR-15 upper group. Also Includes barrel collar to replace the chamber adapter on your 22AR Conversion. Available as: 4.5″ Barrel available with or without a Collar Kit Medium Taper Profile 4140 Chrome Moly Salt Bath Nitride Finish inside and out 1:16 Twist 22LR Sprorting Chamber Threaded 1/2-28″ Available as: 16.1a ^2 Barrel available with or without a Collar Kit M4 Profile 4140 Chrome Moly Salt Bath Nitride Finish inside and out 1:16 Twist 22LR Sprorting Chamber Threaded 1/2-28 .750a ^2 Carbine length Journal Or Ava
Cmmg Ar-15 Barrel Assemblies 22lr
Faxon Firearms Ar-15 Barrels 7.62×39 Russian Gunner Profile. Faxon’s 7.62×39 Gunner Profile Barrel matches their Government barrel profile from the breech to the gas block, then tapers shifts to a lightweight pencil profile for weight savings that won’t compromise accuracy. Removing weight from the front of the 7.62×39 Gunner Profile Barrel ensures enhances your rifle’s maneuverability, while extra metal at the rear maximizes heat resistance and diminishes barrel “whip”. The result is a balanced, mobile, and maneuverable barrel that can handle full-auto fire and is suppressor rated. Chambered for Type 1 or .125″ bolt face depth Conventionally rifled with 1-8″ twist 5/8″-24 tpi muzzle th
Ballistic Advantage Ar-15 Premium Barrels .223 Wylde Stainless Steel. The .223 Wylde chambered barrels are machined from 416 Stainless Steel with a bead blasted finish. Our Premium Series Barrels feature a Nickel Boron Coated Extended M4 Feed Ramp Extension. Hanson Series Barrels feature Ballistic Advantage’s proprietary BA Hanson profile. Hanson barrels are not designed to work with aftermarket piston kits. All NFA/ATF Rules Apply You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm. Additional Info Material: 416R Stainless Steel Finish: Bead Blasted
Faxon Firearms Ar-15 Gunner Barrels. The Faxon GUNNER line of AR barrels are well known in the AR world for their unique profile. The GUNNER profile uses the Government profile dimension from extension to the .625″ gas block, then is a pencil profile from the gas block forward to the front. Removing the weight from the front of the barrel ensures maximum versatility and keeps material to the rear to maximize heat resistance and mitigate whip. Manufactured 100% in-house from cradle-to-grave, these Faxon barrels are fully stress relieved, air-gauge tested, and 11 degree target crowned to ensure superior accuracy. Barrel Material: 4150 CMV Steel Barrel Type: Button Rifled Barrel Caliber: 5.
Faxon Firearms Ar-15/M16 5.56 Pencil Barrels. Faxon AR-15 5.56 Pencil barrels have a narrow O.D. both fore and aft of the gas block, for maximum weight saving. AR-15 5.56 Pencil barrels are manufactured at Faxon’s ISO-certified facility from one of the hardest materials on the planet, 4150 CMV carbon steel, featuring a QPC black Nitride or FDE coating for superior wear-resistance and longevity. Models available for use with carbine- or mid-length gas tubes .625″ O.D. at gas shoulder accept low-profile gas block 1″ long or less Will not accept standard-length front sight block 1-8″ twist rifling to stabilize the entire range of common loadings Muzzles have 1/2″ x 28 thre
Brownells Ar-15 10mm Auto Barrels 4150 Steel. The Brownells 10mm Auto AR-15 barrel allows fans of the powerhouse 10mm cartridge to built an AR-style carbine or pistol chambered in their favorite pistol round, enhancing its usability with a new platform. The Brownells 10mm Auto AR-15 barrel is machined from triple stress-relieved 4150 steel, which features a nitride coating for added strength. Each barrel comes equipped with 360-degree feed ramps and a hand-polished chamber that ensures reliable extraction. Features 1:16 rate of twist Designed to work with any blowback .40 S&W bolt-carrier group Features 11-degree target crown Includes threaded muzzle with 5/8×24 TPI thread pitch The Brownells
Yankee Hill Machine Co. Ar-15 Threaded Fluted Barrels. This YHM barrel features a 5.56x45mm NATO chamber for full compatibility with surplus mil-spec ammunition or commercial 223 Remington ammunition. Constructed of 4140 chrome moly steel with a threaded muzzle, the barrel is Melonited for ultimate surface protection. The melonite coating provides a thinner surface than chrome-lining, so bore friction is reduced for better accuracy. In addition, melonite is harder than chrome-lining providing a longer wear life. This barrel is an excellent choice for a general-purpose AR rifle build. It is perfectly suited for use at the range, in a 3-Gun match, or in the field pursuing game. YHM-48-TF Surface: Diamond Fluted Length: 16.5
Foxtrot Mike Products 41v50 Match Grade 5.56mm Barrel W/223 Wylde Chamber & Gas Block. FM Barrel Kits with Ready-to-go Gas Block These exclusive barrel kits for Brownells from FM Products feature an included gas block that ensures proper alignment and a good gas seal every time. The gas block indexes with a small cutout in the barrel, so that you no longer have to worry about short stroking due to a canted gas block. The gas block and barrel are also pre-cut for the included roll pins, which makes for an extremely robust attachment method, no set screws to worry about coming loose! Barrels are available in 16, 13.9 and 12.5 inch lengths. The 13.9 option is great for pinning and welding muzzle devices, and the 12.5 is a solid option for pistols or SBRs.