Fn Ar-15 Hammer Forged M4 Barrels. FN America builds the battle-ready machine guns that U.S. military forces depend upon around the world, and they’ve been building combat-proven platforms for more than 100 years. Now, you can benefit from the company’s expertise and manufacturing prowess by getting your hands on one of its hammer-forged M4 carbine barrels. The use of cold-hammer-forging instead of button-rifling in these FN M4 carbine barrels means that they have a level of durability that’s unsurpassed in any other barrel design. These barrels are designed to take the punishment of fully automatic fire without skipping a beat, so they’ll handle whatever you can throw at them. Each barrel is treated w
Fn Ar-15 Hammer Forged M4 Barrels
Fn Ar-15/M16 5.56x45mm Cold Hammer Forged Barrels. With its more than 100-year legacy of exceptional barrel manufacturing, FNH USA has long perfected the cold hammer forging process to ensure accuracy and durability. These AR-15/M16 barrels are hammer forged using the same proprietary high-grade Chrome Moly Venadium steel used in FN’s venerable machinegun barrels produced to handle the punishment of sustained fully-automatic fire. After forging, each barrel is Magnetic Particle tested to ensure that it is free of micro-stresses or flaws, resulting in consistency and quality in every barrel shipped from the factory. The bore and chamber are chrome lined to help resist corrosion and provide resistance to heat erosion which great
Wilson Combat Ar 308 Super Sniper Barrel 6.5 Creedmoor. The long-range shooting world is dominated by rifles chambered in 6.5 Creedmoor, and competitors, hunters and long-range shooters alike are looking for every advantage at extended distances. One product designed to provide increased capabilities is the Wilson Combat 6.5 Creedmoor Super Sniper Barrel. Each match-grade AR barrel in the company’s lineup is machined from 416R stainless steel, and the Wilson Combat 6.5 Creedmoor Super Sniper Barrel is no exception. However, this particular barrel features several elements that are optimized for long-range performance. The design is optimized for longer, heavier-weight projectiles used to push the limits of the 6.5 Creedmoor round.
Brownells Ar-15 458 Socom Barrel. The Brownells .458 SOCOM AR-15 barrel is an affordable option for your next big-bore AR build, including all of the right features for a high-quality, long-lasting AR that will exceed all expectations. The Brownells .458 SOCOM AR-15 barrel is constructed from 4150 GBQ mil-spec bar-stock steel, which is stress relieved and nitride-treated for added durability. The barrels are all button-rifled with traditional land-and-groove rifling. 1:14 rate of twist Threaded muzzle for suppressor attachment .875″ OD gas block 11-degree target crown 11/16×24 muzzle thread pitch Magnetic particle inspected The Brownells .458 SOCOM AR-15 barrel is comp
Bravo Company Ar-15 Enhanced Lightweight Barrel Assembly Kits. Brownells is proud to partner with BCM to offer these exclusive Enhanced Lightweight Barrel Assembly Kits. Available in either 14.5″ or 16.1″ lengths with a mid-length gas system, the Enhanced Profile offers a number of advantages over the USGI type of profile, highlighting a continuous taper designed for optimal weight, balance, and performance. The Enhanced Profile does away with the sharp handguard cap shoulder for improved barrel harmonics and improved accuracy, and also features a tapered profile out front, for easier maneuverability. Included in both kits is a phosphate finished, steel, .625 BCM Low Profile Gas Block and a BCM Mid-Length Gas Tube to allow you to complete
Criterion Barrels Ar-15/M16 Hbar Rifle Barrels. The Chrome Moly AR-15 HBAR contour barrels feature a gas port drilled for a .750 gas block. An indent is provided opposite the gas port to enable easy installation. Also included is an M4 barrel extension. These barrels accept muzzle devices with a 1/2×28 thread. Chambers are finished, but barrels should be headspaced and installed by a qualified gunsmith prior to use. Include a headspaced BCM Bolt Assembly with your Criterion chrome-lined barrel. The BCM Bolt is MPI tested, includes tool steel machined extractor, BCM Extractor Spring and is shot peened for increased strength.
Volquartsen Ruger 10/22 Takedown Barrel 22 Long Rifle Lightweight Profile. If you’re one of the thousands who own a Ruger 10/22 Takedown, then Volquartsen offers a must-have kit that enables you to enhance the capabilities of this tried-and-true design. The innovative Volquartsen 10/22 Lightweight Profile Tension Rifle Barrel is built to enhance accuracy and barrel life on your takedown platform. Installation of the Volquartsen 10/22 Lightweight Profile Tension Rifle Barrel is easy, and the company includes all the tools and parts needed to change out barrels. All that’s needed is a compatible 10/22 Takedown receiver and a stock fore-end that can accept a standard .920 bull barrel. Barrel length: 16.5 inches All-black finish Weig
Shilen Select Match Barrel. Hand chosen for the ultimate in accuracy. Button rifled, stress relieved, hand lapped, air gauged and optically inspected to ensure that each one falls within the Select Match category. That means within .0003″ of specs and uniform over the entire bore to within .0001″. Not threaded or chambered.
