Nemo Ar .308 Steel Barrels. The heart of every NEMO rifle begins with an in house machined barrel. These barrels start with premium Bartlein blanks, and then they are chambered, contoured, and finished right here at NEMO Arms on our own machines. A match chamber, NEMO medium contour profile, and Bartlein’s world class single point cut rifling process ensures a solid base for an accurate rifle. 16″ or 20″ Stainless Steel Bartlein blank single point 5R rifling Mid-length gas system or Rifle Length gas system .308 Match chamber Threaded 5/8-24 tpi Recessed crown for use in DPMS/LR308 pattern rifles DOES NOT INCLUDE BOLT!
Nemo Ar .308 Steel Barrels
Bsf Barrels 308 Ar Barrel Carbon Fiber 308 1-10 Twist. Match-grade .308 AR carbon fiber barrels from BSF are built with meticulous attention to detail to ensure you’ll achieve the best possible accuracy – without getting a hernia hauling your rifle to the range! Like all BSF barrels, .308 AR pattern barrels are turned from ordnance-grade 416R stainless steel, then roll-wrapped with a tensioned, carbon fiber sleeve. The sleeve keeps weight down while providing excellent rigidity, plus enhanced cooling. BSF uses this sleeve method on their .308 AR barrels rather than simple carbon fiber wrapping because they believe wrapping traps heat, which increases the risk of delamination. Further, BSF uses a special carbon fiber that expands at
Bsf Barrels Ar-15 Barrel Carbon Fiber 223 Wylde 1-8 Twist. The BSF .223 Wylde Carbon Fiber AR-15 Barrels are built around a 416R stainless steel inner core wrapped in an advanced carbon fiber jacket for enhanced strength and rapid cooling. The result is the rigidity and stability of a heavy target barrel without the enormous weight penalty – your rifle is just as accurate but much easier to lug around! Since the carbon jacket on BSF .223 Wylde Carbon Fiber AR-15 Barrels contact only 5% of the inner barrel, there is an air pocket between the two that allows air to flow freely and keep the inner barrel cool. Vent holes in the carbon fiber jacket let the heat out, promoting a convection cooling process that results in a barrel that can be handle
Bsf Barrels 308 Ar Barrel Carbon Fiber 6.5 Creedmoor 1-8 Twist. BSF builds their match-grade carbon fiber barrels with exceptional attention to detail that ensures you’ll achieve the best possible accuracy from your 6.5 Creedmoor AR-pattern rifle without getting a hernia lugging it around! BSF 6.5 Creedmoor barrels are turned from ordnance-grade 416R stainless steel, then given a roll-wrapped, tensioned, carbon fiber sleeve. The sleeve keeps weight down while providing excellent rigidity, coupled with enhanced cooling. Why the sleeve method, rather than simple carbon fiber wrapping? The BSF folks believe wrapping traps heat and, as a result, is more likely to delaminate. Further, BSF uses a special carbon fiber that expands at the same rate
Foxtrot Mike Products Ar-15 Mike-9 Ultralight Barrel 9mm. So much of the weight of any carbine is often found in the barrel, and this fact led to many consumers clamoring for an ultralight barrel for their 9mm carbines and AR pistols. Foxtrot Mike Products stepped up with its Mike-9 9mm Ultralight Barrels. Each of Foxtrot Mike Products’ Mike-9 9mm Ultralight Barrels are machined from 41V50 chrome-moly vanadium steel and are finished to provide match-grade accuracy and precision, thanks to a button-rifling process that cuts a 1:10-inch twist rate designed to stabilized all 9mm projectiles. All-black finish Barrel length: 16, 8.5 or 7 inches Features 1/2-36 TPI threaded muzzle Salt bath nitrided QPQ/Melonite fini
V Seven Weapon Systems Ar-15 Kmr Barrel Nuts. Manufactured To Bcm’S Kmr Barrel Nut Print To Be A Drop In Item For Your Bcm Gunfighter Kmr & Alpha . Constructed From Grade 5 Titanium Can Be Purchased Alone Or W/Clamp Block Set Weighs 26 Grams Lifetime Warranty Made In The United States Use With V Seven Ti Kmr Clamp Blocks
Proof Research Zermatt Rimx Prefit Carbon Fiber Barrel. PROOF Research shouldered pre-fit carbon fiber barrels for Zermatt Arms RimX actions make it easy to upgrade your rifle or change calibers. The pre-fit Zermatt Arms shouldered barrels are easy to install. Simply thread it on, torque it down, double check headspace and head for the range. These carbon fiber-wrapped barrels provide a high end alternative to traditional barrels while still maintaining extreme accuracy, performance and durability. Match-grade accuracy Improved heat dissipation for cooler and longer lasting barrels No point-of-impact shift during high-volume fire Reduced harmonic barrel vibration
Ballistic Advantage Ar-15 Modern Series Barrels 9mm. This 9mm chambered 4.5 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and 1/2-28 x .400 full profile threads. Designed to work with both Colt/RR and Glock style AR builds. Compatible with standard mil-spec uppers. There are also numerous dedicated 9mm upper options that work. Requires the use of a unique magwell conversion with UZI mags or a dedicated 9mm lower with Glock mags. 9mm on an AR15 platform operates by blowback and does not need a gas block or gas tube. Threaded 1/2×28 or 1/2×36 to give you greater versatility when choosing a suppressor. Integrated feed ramp and barrel ex
