Shilen Remington 700 Barrel. The fastest, most convenient method available to any gunsmith for rebarreling and accurizing the fine Remington 700 action. Now you can provide your customers with the increased accuracy and superior performance that only a custom, match-quality barrel can deliver without time-consuming and costly lathe work. Brownells match-grade barrels are pre-threaded and short-chambered for ease of installation. Plus, the bolt body counterbore is fully cut. Groove tolerances are uniform to within .0003″ end-to-end and air-gauged to ensure conformity. After installation, use a hand-turned finish reamer to deepen chamber until correct head space is reached, (correct Reamer and Headspace Gauges req
Shilen Remington 700 Barrel
Shilen Remington 700 Factory Contour Pre-Threaded Barrel. Made for Brownells by Shilen to match the factory contour. Upgrade the performance and accuracy of Remington 700 rifles without costly stock work. Match-grade, short-chambered barrels have the correct contour to drop into Remington factory or aftermarket stocks with little-to-no barrel channel modifications. Install with your factory recoil lug. Muzzle is cut at 90deg to the bore and ready for crowning. After installation, use a hand-turned, finish reamer to deepen chamber until correct headspace is reached.
Cry Havoc Tactical Ar-15 Qrb 2 Pin Upper Receiver Takedown Kit. The Cry Havoc Tactical QRB 2 Pin Upper Receiver Takedown Kit for AR-15 style rifles or pistols. While the QRB was primarily designed for the civilian market, non-civilian applications range from the Air Force using the QRB on the Air Crew Survival Weapon for ALL Fighters and Bombers, Motorcycle Police who did not have room for a standard AR-15/M4, to Operators in areas where an exposed AR-15/M4 might bring unwanted attention. In these and other cases, where there is a need for an AR-15/M4, the QRB now makes it possible to fit a rifle into a tight space but still have a usable barrel length for increased velocity. Assemble and Fire in seconds, even i
Cmmg Barrel And Bolt Carrier Group Kits 45acp. The CMMG MkG Barrel and BCG Kit allow you to build a Pistol Caliber Carbine using their Patent Pending Radial Delayed Blowback System. Unlike typical direct blowback systems, the CMMG RDB uses a bolt that is forced to rotate and unlock, slowing the BCG. This results in a lighter BCG for a lighter rifle, and less felt recoil than a straight blowback system. While the CMMG GUARD 45 was designed for .45 ACP, they have tested it, and are proud to say that it is safety rated to fire 450 SMC. The MkG Barrel and Bolt Kits are designed to work exclusively with CMMG’s MkG Lowers, and a mil-spec upper receiver with an enlarged ejection port. Other manufacturers’ receivers may work,
Cry Havoc Tactical Ar 308 Qrb Upper Receiver Takedown Kit. Cry Havoc Tactical takes their QRB kit and scales it up for the big guns! Designed for your AR 308 or 6.5 Creedmoor the QRB allows you to quickly detach the barrel giving you the ability to store or carry your rifle in a much reduced profile and then when needed quickly reassemble the rifle while holding within 1 MOA. Each kit contains complete instructions and all parts to convert your rifle or without drilling or any permanent modifications. Although they recommend installation be done by a Gunsmith, if you can install a barrel on an upper receiver, you can install this kit. Simple hand tools, an Armour’s wrench and receiver block/vise is all that is nee
Criterion Barrels Ruger Precision Rifle 308 Winchester Barrels Prefit 26. The Criterion Ruger Precision Rifle 26-inch barrel enables users of the Ruger Precision Rifle to improve their gun’s accuracy and overall performance by adding on a custom aftermarket barrel. The Criterion Ruger Precision Rifle 26-inch barrel is available for rifles chambered in .308 Winchester and and features meticulous hand-lapping inside the bore for maximum quality. Built from 416R stainless steel Threaded muzzle measures 5/8-24 pitch Total twist rate of 1:10 The Criterion Ruger Precision Rifle 26-inch barrel can be ordered with either a Target contour or a Palma contour.
Criterion Barrels Ruger Precision Rifle 6.5×47 Lapua Barrels Prefit 26. The Ruger Precision Rifle is know for its out-of-the-box accuracy, but adding a Criterion Ruger Precision Rifle 26-inch barrel to the platform can shrink group sizes even more. The Criterion Ruger Precision Rifle 26-inch barrel is custom made and is chambered in 6.5×47 Lapua, featuring a hand-lapped bore that meets intense quality-control requirements. Constructed using 416R stainless steel 5/8-24 TPI threaded muzzle Twist rate of 1:8 The Criterion Ruger Precision Rifle 26-inch barrel can be ordered with either Palma or Target contours and are easily switched using Ruger’s barrel-nut design.
Criterion Barrels Ruger Precision Rifle 6mm Creedmoor Barrels Prefit 26. The Criterion Ruger Precision Rifle 26-inch barrel allows Ruger Precision Rifle owners to upgrade their factory barrel to one that has been hand-tuned to provide the most accuracy possible. The Criterion Ruger Precision Rifle 26-inch barrel is chambered in the flat-shooting 6mm Creedmoor and is made with special attention being paid to the bore, which is finished with hand lapping. Constructed using 416R stainless steel Thread pitch of 5/8-24 TPI 1:8 twist rate The Criterion Ruger Precision Rifle 26-inch barrel can be had with several contour options, either Palma or Target, depending on the user’s preference.