Troy Industries Ar-15 2 Low Profile Gas Block. Listen, there’s no reason for you to worry about whether or not your gas block will fit under that slim handguard of yours. Just get the Troy Low Profile Gas Block and create the sleek AR you’ve been dreaming of. What’s more, the Troy Low Profile Gas Block is also designed to cover the area used by traditional A2 front-sight gas blocks, so if you’re upgrading your rifle, you can cover up those ugly taper-pin holes with this block. The 2-inch unit is machined from 4140 steel and treated with a durable manganese-phosphate finish. The inside diameter of the Troy Low Profile Gas Block is .750 inch, and you’ll have to find your own gas-tube roll pin to complete th

Troy Industries Ar-15 2 Low Profile Gas Block

Troy Ar-15 2 Low Profile Gas Block


Geissele Automatics Llc Ar-15/M16 Super Gas Block Low Profile. Minimal-bulk gas block fits easily under most free-float rails. All-steel construction provides plenty of strength to resist erosion from hot gas. Precisely machined for a close slip fit on standard .750″ OD barrels. Includes mounting hardware and instructions. Gunsmith installation recommended.

Geissele Automatics Llc Ar-15/M16 Super Gas Block Low Profile


Phase 5 Tactical Ar-15 Pistol Pigtail Gas Tube. If your AR-15 pistol with a 7.5 inch barrel has timing issues due to being over-gassed, the Phase 5 Pistol Pigtail Gas Tube is the solution to your problem. The Phase 5 Pistol Pigtail Gas Tube design adds length to an otherwise short gas tube, having the effect of simulating a standard cycle time. The Phase 5 Pistol Pigtail Gas Tube is a quick and inexpensive way to solve your timing problem, because it frequently tames even the most over-gassed AR pistols without the need to experiment with buffer weights, different carriers, etc. A more mil-spec pistol means a more reliable pistol. Loop diameter: 1.46 to 1.56 inches Material: Stainless steel The Phase 5 Pistol P

Phase 5 Tactical Ar-15 Pistol Pigtail Gas Tube


Heckler & Koch 416 Gas Block For 14.5/16 Inch Barrel. Anyone who’s tried to build the perfect HK 416 clone or even make anything close to it knows how hard it is to get all the right components. If you’re even thinking about putting one together someday or you just want to take your MR556 to the next level, you’ll need to plan ahead and start getting your components together. This genuine HK 416 gas block is one of the missing pieces to your puzzle, so you’ll want to snag one now before you can’t get them anymore. As an added safety and reliability bonus, these gas blocks also feature a correctly milled gas-relief hole. This low-profile HK 416 gas block is designed for use with 10-inch barrels and will fit .750-

Heckler & Koch 416 Gas Block For 14.5/16 Inch Barrel


Vltor Weapon Systems Ar-15 Gas Block Low Profile. Slim replacement for cumbersome USGI front sight/gas block tower features a low profile for a more streamlined appearance and less chance of snagging on vegetation and other gear. Covers only 1″ of barrel length and reduces weapon’s forward weight for improved handling and maneuverability. Clamp On models squeeze around the barrel with included socket head screws. Set Screw models use included set screws at the bottom of the unit to anchor the gas block to the barrel for the lowest-profile installation.

Vltor Weapon Systems Ar-15 Gas Block Low Profile


Schuster Ma Adjustable Gas System. Vented steel design changes cycle time by letting you adjust the gas volume in the cylinder. Quick adjustment of vent size with integral set-screw; eliminates changing screws for different vent sizes. Reduces battering on op rod, bolt lugs, receiver and trigger group. Available for M1 Garand and M1A.

Schuster Ma Adjustable Gas System


Badger Ordnance Ar-15 Gas Block Mk12. Slim, low-profile replacement for factory front sight gas block provides maximum clearance for optics and free-float handguards. Streamlined profile reduces forward weight and improves your rifle’s appearance. Set screws, gas tube mounting pin, and installation instructions included. Mk 12 is an exact copy of the gas manifold on the Mk12 Mod 1 and Mk 18 Mod 1 Special Purpose Rifles used by the U.S. Army and Navy. Made from 416 stainless steel with a tough, wear-resistant black oxide finish, and fits barrels with .750″ O.D. Mk 12 Style in natural stainless, has the same low profile as the Mk12 Mod 1 gas manifold, and fits barrels with .875″ O.D.

Badger Ordnance Ar-15 Gas Block Mk12


Badger Ordnance Tdx Gas Manifold. The Badger OrdnanceTDX Gas Manifold is our smallest manifold and will fit under any free float handguard. Machined from 416 Stainless Steel and secures with 2 Stainless set screws.

Badger Ordnance Tdx Gas Manifold